Selected References

Firma
Referans Kişi
Güç Yıl HES Yapılan İşler Türbin/Jeneratör
Üreticisi
Bereket Enerji 35 MW 1999 Dalaman
I-II-III-IV-V
SCADA/Otomayon
Devreye Alma
Çin/Almanya
Maraş Enerji
Emrah Uygar
2 x 4.8 MW 2009 Firnis Elektrik Kablolama
SCADA/Otomasyon
Devreye Alma
Norveç/İspanya
Yenigün Enerji
Celal Çıtak
2 x 3.2 MW 2010 Posof III EM Montaj
SCADA/Otomasyon
Şalt Projelendirme/Uygulama
Devreye Alma
Avusturya/Polonya
Gürüz Enerji
Ersin Taşkapıoğlu
1 x 1.1 MW
1 x 0.45 MW
2010 Tuztaşı EM Montaj
SCADA/Otomasyon
Şalt Projelendirme/Uygulama
Devreye Alma
Çin/Çin
Essentium Enerji
Hüseyin Çelik
1 x 8.5 MW
1 x 5.25 MW
2011 Merekler EM Montaj
Şalt Projelendirme/Uygulama
Devreye Alma
Avusturya/İspanya
Uslu Enerji
Metin Uslu
2 x 8.05 MW
1 x 4.05 MW
2011 SAF I EM Montaj
SCADA/Otomasyon
Şalt Projelendirme/Uygulama
Devreye Alma
Çin/Çin
Peker Enerji
Eren Kent
2 x 4.6 MW
1 x 1.9 MW
2011 Serge EM Montaj
SCADA/Otomasyon
Şalt Projelendirme/Uygulama
Devreye Alma
Çin/Çin
Peker Enerji
Eren Kent
2 x 3.4 MW
1 x 1.36 MW
2011 Tuzlaköy EM Montaj
SCADA/Otomasyon
Şalt Projelendirme/Uygulama
Devreye Alma
Çin/Çin
Yüksel Yapı
Oğuz Berkol
2 x 7.65 MW
1 x 3.3 MW
2012 Çobanlı EM Montaj
SCADA/Otomasyon
Şalt Projelendirme/Uygulama
Devreye Alma
Çin/Çin
Eksen İnşaat
Çağrı Velidedeoğlu
1.6 MW 2013 Koçak 2 EM Montaj
Şalt Projelendirme/Uygulama
Devreye Alma
Avusturya/Avusturya
Savaş Yalkın 1 x 6 MW
1 x 1.4 MW
Francis Yatay
2013 Yazılı Elektrik Montaj
SCADA/Otomasyon
Şalt Projelendirme/Uygulama
Devreye Alma
Avusturya/Avusturya
Akfen
İrfan Erciyas
125 GW 2013 Karasu
(5 adet HES)
Akfen’e ait 5 adet HES’in Alman fon firmasına satışı ProMIS tarafından gerçekleştirilmiştir.
Enera A.Ş. 3.77 MW 2014 Arpacık Malzeme temini ve Elektromekanik kurulum süpervizörlüğü

 

İtalya/İtalya
Tek-en Enerji Üretim A.Ş. 17,3 MW 2014 Göksu Elektrik Otomasyon Temin ve Montaj İşleri, 154 kV Şalt Elektromekanik Temin ve Montaj İşleri Avusturya/Avusturya
 

 77 Construction

 

65 MW 2014 Kajhaki Ünite 2 Elektrik-Mekanik Temin ve Montaj İşleri, Otomasyon ve Yenileme Çin/Çin
Yek Enerji 7 MW 2016 Aybige Anahtar Teslimi Elektrik ve Mekanik İşler İngiltere/ İSpanya
Firma Lokasyon Kapasite (m3/h) RMS Yıl
Kaptan Demirçelik A 2002
Yurtbay Seramik B 2002
Ege Seramik A 2002
Mön inşaat A 2002
indet iaat Turgutlu A 2002
Eti Gıda B 2002
Limak iaat A/B 2002
Nova Pignone Bari, italya A 2002
Türkerler inşaat 1,000,000 2004
çorumgaz Çorum 100,000 2004
Gaznet Konya 2004
Arsan Atma istanbul 2004
indet inşaat Kayseri 120,000 2004
çorumgaz A 2005
indet inşaat (8 istasyon) A 2005
SürmeligazÇorumgaz Yozgat (3 istasyon) A 2006
izgaz Aliağa A 2006
izgaz Kandıra 25,000 A 2007
Çinigaz Nevşehir 75,000 A 2007
Erzingaz Erzincan 80,000 A 2007
Aksaraygaz Aksaray 30,000 A 2007
izmir EÜ izmir A 2007
Antalya Şehir Antalya A 2007
Başkent OSB Ankara A 2007
Akhisar Şehir Akhisar A 2007
Kastamonu Şehir Kastamonu A 2007
Kargaz Kastamonu 10,000 A 2008
Kargaz Çankırı A 2008
Kargaz Karabük A 2008
Olimposgaz Antalya 320,000 A 2008
Diyargaz Diyarbakır 100,000 A 2008
Torosgaz Burdur 20,000 A 2008
Torosgaz Aydın A 2008
CNGGaz Söke 9,000 A 2008
Bahçeşehirgaz Bahçeşehir 25,000 A 2008
Özmaya Adana A 2008
Alarko Kırklareli A 2009
Kastamonu Entegre Gebze 19,000 A 2009
Pemi Edirne 2009
Perni Kırıkkale A 2009
Enerjisa Bandırma A 2009
Gebze Makina OSB Gebze A 2009
Ankara OSB Ankara A 2009
Polgaz Polatlı 60,000 A 2010
Palgaz Pelitli 300,000 A 2010
içdaş Bandırma A 2010
Kırgaz Kırıkkale A 2010
Seydişehir Şehir Seydişehir A 2010
Aydıngaz Aydın 98,000 A 2011
Zorlu Muratlı 80,000 A 2011
izmirgaz Esbaş ii A 2011
Aydıngaz Nazilli 75,000 A 2012
AGE Enerji Denizli 26,000 2012
Palen Ene~i Ales (Aydın) 13,000 A 2012
Batman OSB Batman 25,000 2012
Akmercangaz Bafra 50,000 2012
Akmercangaz Ladik 20,000 2012
Akmercangaz Havza 30,000 2012
Akmercangaz Vezirköprü 30,000 2012
Akmercangaz Örnekköy 2012
Energaz Söke 76,000 A 2012
Torosgaz Isparta 50,000 A 2012
Fiogaz Ales Enerji Santrali 13,000 A 2012
Erce Enerji Hatay A 2012
Batman OSB Batman 25,000 A 2012
İzmirgaz İzmir Kokulandırma A 2012
Kırgaz Kırıkkale 30,000 A 2013
Akmercan Bafra 80,000 A 2013
Akmercan Ladik 20,000 A 2013
Akmercan Havza 30,000 A 2013
Akmercan Bafra 80,000 A 2013
Akmercan Vezirköprü 30,000 A 2013
Energaz Aydın 30,000 A 2013
Torosgaz Isparta 50,000 A 2013
Tüpraş İzmit 2014
Özsoy Mühendislik Eskişehir 15,000 A2 2014
Kapadokya Gaz Niğde 100,000 A 2014
Akmercan Batıkar / Zonguldak 80,000 A 2014
Bandırma OSB Balıkesir 2014
Kocabaş Denizli 2014
Erce Esan Eczacıbaşı 15.000 A 2014
Serhatgaz Iğdır 38.000 A 2015
Hamidabat Elk. Üretim HEAŞ 260.000 A 2015
Igdaş Pendik 1.000.000 A 2015
Igdaş Esenyurt 1.000.000 A 2015
İzgaz Tüpraş 500.000 A 2015
Kargaz Seydiler 10.000 A 2015
Polgaz Polatlı OSB-3 A 2015
Akmercan Muğla 60.000 A 2015
Akmercan Yatağan 40.000 A 2015
Akmercan Mardin 80.000 A 2015
Enerya Honaz/Denizli 38.000 A 2015
İmta Batman TPAO 15.000 A 2015
Erce Kangal A 2015
Akmercan Sinop 40.000 A 2016
Akmercan Sinop 40.000 A 2016
İzmirgaz Aliağa A 2015
Erce Enerji Osmaniye, Kayalı 15.000 A 2016
Erce Enerji Antakya OSB 40.000 A 2016
Akfel Kırıkkale IPP 170.000 A 2016

RMS Projects are still active, every year since 2016 more than 10 projects per year has been realized as of 2019

DNO – Tanker Loading Station – Zakho/Fishkabour, Iraq   2008  A

ProMIS designed and engineered as an EPC contractor 2 off 10,000 and 1 off 3,000 TONS of crude oil tanks. Tank manufacturing was done by sub contractor . ProMIS supplied all the necessary materials for 6 island of truck loading station, with fire fighting, canopy manufacturing, electrical and Foxboro DCS work. ESD was done by PLCs. All equipments supplied by ProMIS including pumps, loading arms. AS a turnkey project, erection and commissioning was be done by ProMIS. Mainly Foxboro equipments were used.

URFA City of Municipality Water Distribution              2006           B

 European Commission approved project was contracted by AGE –Insaat, Ankara. ProMIS has finished successfully completed project with RF Wireless PLC/RTU system and SCADA interface for the entire city of Urfa, Total of 18 wireless stations were used to control the entire city water distribution from water pumping stations. ProMIS did the project management for the control side, erection, commissioning and start-up.

Silo Company of Syria                                                             2005           F

Full automation of 32 cement silos, loading, unloading, stocking. Omron PLC and Citect SCADA software has been designed with ProMIS engineers and gave a full support and training to System Integrator (Techno Lead)  in Syria to complete and support this project by themselves. 5,000 I/O Citect was used to design the whole system.

Sivas Kangal Thermal Power Plant                                     2004           C

Full process control and automation project will be engineered, commissioned, and completed at the power plant coal conveying system. Cabling, installation of the sensors is in the SOS. Redundant Siemens S7-400 will be used along with redundant 1,500 I/O Citect with additional 4 users.

ORFEN / Çamsan                                                                       2003            E

Wooden panel packaging system automation will be achieved by ProMIS engineers using  Siemens S7-315 PLC with Citect SCADA package. Total of 2 CPUs will network to each other. Project has around 400 physical I/Os. Engineering, commissioning and start up will be done by ProMIS in addition to cabling and installation.

Kavaklidere Saraplari (III Phase-Nevsehir)                    2003           E

For Wine Seller 55 fermentation tanks will be automated  by temperature control and monitoring system. Sixnet PLC/RTU and 500 I/O Citect was used. Instrumentation which involved in Actuators (kinetrol) and stainless steel

Kavaklidere Saraplari (III Phase)                                         2002           E

For Wine Seller 40 fermentation tanks temperature control and monitoring. Sixnet PLC and Citect was used. Instrumentation which involved in Actuators (kinetrol) and stainless steel valves(4G) were installed.

NAJIBIYAH POWER PLANT                                                   2001           A

2 X 100 MW Power plant DCS automation. DCS System was ABB Freelance. ProMIS was a subcontractor and supplied full BMS, entire plant automation including instrumentation, installation and startup. ESD system was PLC based. PLC was Mitsubishi Series. Total I/O was over 3,500 I/O and there were about 2,000 instruments existed in the project In relation to Power Plant, water treatment plant automation was done by ProMIS, Citect SCADA and Mitsubishi PLCS were used. 750 I/O system implementation, erection and commissioning was done.

ETIBOR A.S. (Government)                                                   1999           B

Is the only Borax plant in Turkey. ProMIS signed a turnkey contract to build their Sodium Mono- hydrate facility including the civil, mechanical and electrical engineering. System is involved in PLC/DCS and SCADA for about 400 Inputs and Outputs of which around 110 Analog points.

Hunca Cosmetic Co.                                                                  1999           B

This turnkey project except construction which was done by the client. Project was  involved in Shampoo production. All the equipments used in this process were Stainless Steel. Total of 7 tanks each capacity 5 Tons except one had 25 Tons capacity. The System was designed 100% full automation with two workstations of which one engineering and one production operator station. PLC and SCADA control system with RTU’s and PLCs. For long distances remote I/O cards were used. Process was batch control system with two production tanks. Project was managed by ProMIS however, on the paper main contractor was shown as ISS, Inc. since the entire project was financed by a German Bank which was arranged by ISS, Inc.

TEIAS Ambarlı, İstanbul                                                       1998           E

PLC program was written by third party and SCADA system was written by ProMIS. SCADA was Citect. Water Treatment plant automation.

Al Sadat City Flour Mill – Egypt                                             1998           B

1,500 I/O SCADA and PLC software development and installation for flour mill. 3 Workstations were networked. 2X250 Ton/day capacity. Total  of  7 silos automation. Omron PLC was used.

Abu Carcas Flour Mill – Egypt                                              1998           B

PLC software development and installation for flour mill.  2 X 144 ton/day capacity. Total of 7 silos automation. Omron PLC was used.

Kavaklidere Saraplari (II Phase), Ankara                        1998           E

For Wine Seller 48 fermentation tanks temperature control and monitoring. Sixnet PLC and Citect was used. Our Actuators (kinetrol) and stainless steel valves(4G) were installed.

YTONG, Gebze, Kocaeli                                                              1996           F

Pneumatic conveying system design, manufacturing and installation with PLC control.

TEKEL Tobacco Company, Istanbul                                    1996           F

Design of conveyor weighing system.

TOPRAK Ceramic, Eskisehir                                                   1996           F

Pneumatic conveying system design, manufacturing and installation with PLC control.

ÇİMENTAS, Kirikkale                                                                 1996          F

Pneumatic conveying system design, manufacturing and installation with PLC control. Samsung PLC was used.

TAMSA Ceramic A.S., Izmir                                                      1996        A

Turnkey project. Heavily involved in bulk material handling. On the mechanic side all of the equipments were designed and manufactured by ProMIS such as, mixers, silos, pneumatic conveying machines, etc. Capacity of production was 10 Ton/hr. Produced ceramic adhesive. 10 silo automation. GEFanuc PLCs and Citect SCADA was used (500 I/Os)

Marmara Kimya Yapı Malzemeleri San. Tic. A.S           1996        B

Turnkey project. Heavily involved in bulk material handling. On the mechanic side all of the equipments were designed and manufactured by ProMIS such as, mixers, silos, pneumatic conveying machines, etc. Capacity of production was 10 Ton/hr. Produced ceramic adhesive. GEFanuc was the main PLC, sub PLCs were Samsung and Citect SCADA was used (500 I/Os)

Çanakkale Ceramic A.S.                                                               1996          C

Pneumatic conveying system was build by ProMIS. Installation was done client. Electric and electronic side was achieved by ProMIS. GEFanuc PLC and Citect SCADA was used.

Marmara Kimya Yapi Malzemeleri San. Tic. A.S             1995          B

Pneumatic conveying system was used to carry the necessary bulk material for the dye kitchen. Batch process was designed and mixers were used for the production. GEFanuc and Samung PLCs were used along with Citect SCADA.

10 silo automation was completed.

Çanakkale Ceramic Glazür Fabrikasi                                  1995         E

Pneumatic conveying system with 150 I/O SCADA PLC system was installed with 12 silo automatic control system was installed.

Marmara Kimya Yapi Malzemeleri San. Tic. A.S           1995         B

Turnkey project. Pneumatic conveying system. 10 Ton/hr. Manufactured, installed and commissioned by ProMIS. GEFanuc and Genesis, Iconics was used.

Çesan Ltd. Sti                                                                                 1995          F

Asphalt plant automation. 150 I/O GEfanuc PLC and Genesis Iconics SCADA system.

KARSU Textile Plant                                                                  1994           E

PLC and SCADA controlled fixation and conditioning machine for yarn plants. Our own engineering design.

Tepe Gypsum Board Plant                                                        1994           E

Pneumatic conveying machine for 80 Ton/hr. Samsung PLC was used.

Nuh Pasta Plant.                                                                              1994           F

Pasta silos were controlled by PLC and SCADA system. MCCs were included in the project. GEFanuc PLC system and Genesis Iconics SCADA package was used.

Amasra Nato Base                                                                           1994           F

Fire extinguishing control system was designed and PLC system installed. GEFanuc PLC used.

Orta Anadolu Textile Plant                                                       1994           D

Water pumping station to feed the water to entire plant was controlled by PLC and SCADA system, including automatic water softening system was designed. MCC control panels were installed by client however, engineering was done by ProMIS. GEFanuc PLC and Genesis Iconics SCADA package was used.

Tüpras Aliaga Refinery                                                                1993           F

Foxboro DCS system commissioning and training. Hydrocracker and isomerization unit engineering.

Orta Anadolu TAS                                                                       1990           B

Foxboro DCS system programming, installation, commissioning and training. Entire ERP and system consulting engineering for four years.